A-met Metrology, Hereford

Portable CMM Accessories

Circular Magnetic Base Mount S-F2008

Circular Magnetic Base Mount S-F2008

With the smallest footprint, strongest individual magnet and a single on/off switch, the S-FIX Circular Magnetic Base is perfect for mounting within machines or on a fixturing table where space is at the premium.

The design makes it easy to manoeuvre, while the Hex Key remains attached to the base using additional magnets.

It includes a switchable Stainless Steel 3½”-8 Threaded Ring.

It uses a branded 160mm magnet and comes complete with a waterproof carry-case for easy transportation and storage.

Magnetic Mount Ground Plate S-F2007

Magnetic Mount Ground Plate S-F2007

An easily manoeuvrable, height adjustable platform for attaching the S-FIX Premium Magnetic Mount to.

Ideal when you want to mount your measuring equipment low down on the floor or on another suitable surface.

Premium Magnetic Base Mount S-F2006

Premium Magnetic Base Mount S-F2006

The S-FIX Premium Magnetic Mount boasts a wide footprint, stainless steel 3½”-8 threaded ring and recessed branded 100KG rated magnets to produce the strongest hold on offer.

The ergonomic shape and all-side machining have made it a comfortable accessory to hold and re-position.

This can also combine with the separately available Ground Plate, allowing your measuring equipment to be positioned on most surfaces.

Suitable for Faro and Romer arms, Laser Trackers and much more.

Threaded Ring Set - 3½"-8 UN S-F2001

Threaded Ring Set – 3½”-8 UN S-F2001

The 3½”-8 Threaded Ring is a direct replacement for the original rings, provided with many portable CMM’s (Faro & Romer,) standard surveying equipment and optical alignment instruments.

It comes complete with 6 x 10-32 UNF screws, 6 x M5 screws and the corresponding hex keys.

Available in Aluminium and Stainless Steel variants.

Please ensure correct variant for quotation.

Screw Down Mount - 3½"-8 UN S-F2005

Screw Down Mount – 3½”-8 UN S-F2005

The Screw Down Clamp offers a simple solution for securing a 3½”-8 thread to a suitable flat surface.

It has a slightly recessed underside to improve fitment.

It offers 6 counterbored through-holes (8.5mm hole diameter/15mm counterbore diameter) and 6 M8 tapped for different applications.

Weight Set for the S-FIX Carbon Tripods S-F2011

Weight Set for the S-FIX Carbon Tripods S-F2011

Three Cast Iron Leg Weights offer improved stability and and greatly reduce the effect of any mishaps, such as kicking a leg.

A custom padded carry case makes them easy to transport.

Weight: 3 x 5KG

Suitable for both the Fixed Height and Adjustable lightweight carbon tripods.

Carbon Tripod - Adjustable Height S-F2010

Carbon Tripod – Adjustable Height S-F2010

Secure, adaptable and incredibly light; the S-FIX Carbon Tripods were designed specifically for using measuring equipment in the field.

They are constructed using woven finish Carbon Fibre tubes together with CNC machined Aluminium and Stainless Steel components.

Once you have removed the tripod from the included custom Nylon carrying bag, simply unscrew the locking screw to fix the legs and adjust the length by un-clamping, manoeuvring and re-clamping them.

The feet offer two easily changeable options. Spikes for hard ground and flat feet for soft work areas.

Weight: 6.7kg
Height: 71-106cm

Optional Leg Weights can be positioned onto the pegs for additional stability.

Carbon Tripod - Fixed Height S-F2009

Carbon Tripod – Fixed Height S-F2009

Secure, adaptable and incredibly light; the S-FIX Carbon Tripods were designed specifically for using measuring equipment in the field.

They are constructed using woven finish Carbon Fibre tubes together with CNC machined Aluminium and Stainless Steel components.

Once you have removed the tripod from the included custom Nylon carrying bag, simply unscrew the locking screw to fix the legs in position.

The feet offer two easily changeable options. Spikes for hard ground and flat feet for soft work areas.

Weight: 3.7kg
Height: 67.5cm

Optional Leg Weights can be positioned onto the pegs for additional stability.

Ring Adapter Sets - ⅜" UNC & ⅝" UNC S-F2004

Ring Adapter Sets – ⅜” UNC & ⅝” UNC S-F2004

Mounting adapter rings and studs for various laser scanners, theodolites and other metrology equipment.

The mounting adapters use a standard 6 hole, bolt down arrangement. This allows them to be swapped onto most of the ‘Tripods & Mounts’ range.

All sets come complete with 6 x 10-32 UNF screws, 6 x M5 screws and the corresponding hex keys.

Replacement FARO Arm Probes

Replacing a broken probe with an Original OEM probe can be an expensive time! We are able to offer OEM equivalent replacement probes at a much lower cost then originals and are also able to offer accessory kits to include adaptor sets to enable you to replace the probe only and not the entire assembly.

Most of the probes below will fit the following Faro arms :-

Faro EDGE , Faro Prime , Faro Quantum , Faro Titanium , Faro Platinum , Faro Fusion , Faro Gage, Gage Plus & Power Gage , Faro Advantage , Faro.

Please quote product reference number at time of enquiry.

S-F8001
S-F8001

Probe End Cap Blank - 1¼" UNC Thread for Faro USB Arms

S-F8017
S-F8017

Carbide Point Probe - M5 Thread

S-F8009
S-F8001

Carbide Point Probe - 1¼" UNC Thread for Faro USB Arms

S-F8011
S-F8011

Carbide Point Probe - 90° Angle - 1¼" UNC Thread for Faro USB Arms

S-F8010
S-F8010

Carbide Point Probe - 45° Angle - 1¼" UNC Thread for Faro USB Arms

S-F8002
S-F8002

M5 Probe Adapter - 1¼" UNC Thread for Faro USB Arms

S-F8012
S-F8012

Angled Probe Extension Set - 1¼" UNC to M5

S-F8006
S-F8006

6mm Ruby Probe - 1¼" UNC Thread for Faro USB Arms

S-F8008
S-F8008

6mm Ruby Probe - 90° Angle - 1¼" UNC Thread for Faro USB Arms

S-F8007
S-F8007

3mm Ruby Probe - 45° Angle - 1¼" UNC Thread for Faro USB Arms

S-F8016
S-F8016

3mm Ruby Probe - M5 Thread

S-F8003
S-F8003

3mm Ruby Probe - 1¼" UNC Thread for Faro USB Arms

S-F8005
S-F8005

3mm Ruby Probe - 90° Angle - 1¼" UNC Thread for Faro USB Arms

S-F8004
S-F8004

3mm Ruby Probe - 45° Angle - 1¼" UNC Thread for Faro USB Arms

S-F10004
S-F10004

Tommy Bar for M5 Probes

S-F8018
S-F8018

Angled Adapter - 90° Angle - M5 Thread

S-F8019
S-F8019

Angled Adapter - 45° Angle - M5 Thread

Male to Female Stainless Steel M5

Male to Female Stainless Steel M5 Probe Extensions 30,50,100mm Lengths

S-F8024
S-F8024

M5 Probe Adapter - ⅜" UNF Thread for Faro Serial Arms

S-F8027
S-F8027

Carbide Point Probe - ⅜" UNF Thread for Faro Serial Arms

S-F8026
S-F8026

6mm Ruby Probe - ⅜" UNF Thread for Faro Serial Arms

S-F8025
S-F8025

3mm Ruby Probe - ⅜" UNF Thread for Faro Serial Arms

S-F9004
S-F9004

Magnetic Leapfrog Sphere Set

Material: 316 Stainless Steel
Sphere Diameter: 25.4mm (1 inch)
Magnet Pull: 13.2kg

S-F9003
S-F9003

Magnetic Leapfrog Point Probe Set

Material: 303 Stainless Steel
Magnet Pull: 13.2kg

S-F9002
S-F9002

50mm Calibration Sphere

The calibration sphere and stand can either be attached to a suitable surface using the included magnetic base or attached directly to another surface using the M8 threaded underside.

Sphericity: 1.3μm

Replacement CMM Probes

Click below to download the latest Styli catalogue for guidance.

Please use product reference numbers when enquiring.

renishaw

 

 

 

hexagon metrology

 

 

 

Calibration / reference artifacts

We are able to offer the calibration of your CMM equipment through a wide range of Metrology Partners throughout the UK and can accommodate the majority of systems, from portable arm CMM's such as Romer / Faro to full gantry CNC CMM Machines, we can provide a solution for you.

We are also able to offer reference artefacts such as reference sphere, CMM calibration spheres, ring gauges all supplied with calibration certificates traceable to national standards / UKAS standard where required.

Please quote product reference number at time of enquiry.

Calibration / reference artifacts

The Easicheck Reference artefact enables the user to perform interim verification checks on any CMM or portable arm in-between annual calibrations. It is recommended your Arm or CMM is checked at regular intervals as part of the ISO 10360 standard.The unit comes complete with the following precision features:

50mm Parallel Length Bar
400mm Parallel Length Bar  (300mm on EasiCheck Mini)
Ø50mm Internal Ring Gauge  (Ø35mm on EasiCheck Mini)
Ø30 Ceramic Sphere
External Taper

All the above items are supplied with UKAS accredited Calibration Certificates.

EMail Sales@amet-metrology.co.uk including the product reference code for all cmm / portable arm accessories for a free no obligation quotation